Whitewater


Resources
Whitewater Requirements
Current Scouts BSA requirements
as of June 6, 2026
as of June 6, 2026
1.
Do the following:
a.
Explain to your counselor the most likely hazards you may
encounter while participating in whitewater activities,
including branches and trees in water along a shore and
stretching across the stream, rocks, hydraulics over ledges or
lowhead dams, strong wind, low water or air temperature, and
thunder and lightning storms. Explain what you should do to
anticipate, help prevent, mitigate, and respond to these
hazards.
b.
Review with your counselor the prevention, symptoms, and first
aid treatment for the following injuries or illnesses that could
occur while participating in whitewater activities including
cold-water shock; hypothermia; head, neck, and back injuries;
heat-related illnesses; sunburn; dehydration; blisters; bruises;
cuts; sprains and strains; shoulder dislocation; and submersion
injuries.
c.
Discuss with your counselor the Scouting America Safety Afloat
policy and the American Whitewater safety guidelines, including
the use of helmet and life jackets.
2.
Do the following:
a.
Demonstrate understanding of the following river features by
drawing lines to show the flow of water: upstream V, downstream
V, riffle, eddy with an eddy line, ledge, river bend, shallows,
current at different depths, drop, horizon line, and hydraulic.
b.
Describe how waves form including standing waves and wave
trains.
c.
Explain how to tilt or edge the boat without leaning your body
1.
When entering and exiting an eddy.
2.
When ferrying in downstream and upstream directions.
d.
Explain when, why, and how you should scout a river while
ashore, while on the river, and when you should portage your
boat.
3.
Before doing requirements 4 through 12, earn the Canoeing merit badge if
you will be using a canoe to earn this merit badge. If you will be using
a kayak, earn the Kayaking
merit badge. Then do ONE of the following:
a.
If you will be using a canoe to earn this merit badge,
demonstrate strokes and maneuvers from the Canoeing merit badge
to the satisfaction of your counselor.
b.
If you will be using a kayak to earn this merit badge,
demonstrate strokes and maneuvers from the Kayaking merit badge
to the satisfaction of your counselor.
4.
Do ONE of the following:
Option A—Tandem Canoest. Do ALL of the following strokes
and techniques on calm water:
1.
Demonstrate the following strokes in the bow: cross
forward, bow draw, cross bow draw, bow pry, and sculling
draw.
2.
Demonstrate the following strokes in the stern: stern
draw, stern pry, sculling draw, and forward with stern
pry.
3.
Demonstrate a high brace, low brace, and righting pry.
Option B—Solo Canoest. Do ALL of the following strokes
and techniques on calm water:
1.
Demonstrate the following strokes: cross forward, bow
draw, cross bow draw, stern draw, pry, stern pry,
sculling draw, and forward with stern pry.
2.
Demonstrate a high brace, low brace, and righting pry.
Option C—Solo Kayaker. Do ALL of the following strokes
and techniques on calm water:
1.
Demonstrate the following strokes: bow draw, rudder, and
sculling draw.
2.
Demonstrate a high brace and low brace.
5.
Do the following:
a.
Explain the International Scale of River Difficulty and apply
the scale to the stretch of river approved by your counselor.
b.
Identify the specific characteristics of the river that are
factors in your classification according to the International
Scale.
c.
Discuss how the level of flow changes a river from one class to
another and what effects different flow rates have on the
features of a river and its hazards.
6.
Explain the importance of communication during every whitewater outing.
Demonstrate knowledge and ability to use the following American
Whitewater Universal River Signals, both visual and auditory: "Stop,"
"Are you OK?," "Help/emergency," "Run river right," "Run river left,"
and "All clear—come ahead."
7.
Do ONE of the following:
a.
If completing this merit badge in a canoe, describe the various
types of canoes used on moving water and how they differ in
design, materials, and purpose.
b.
If completing this merit badge in a kayak, describe the various
types of kayaks used on moving water and explain how they differ
in design, materials, and purpose.
8.
Review with your counselor the personal and group equipment necessary
for a safe whitewater outing and how and why it is used.
9.
Demonstrate your ability to read a Class II section of river approved by
your counselor. Describe the most desirable paths or lines of travel as
well as alternative routes and options. Point out how to use the
existing water features to your advantage, and explain how to best avoid
the hazards present.
10.
Wearing a proper life jacket and being appropriately dressed for the
weather and water conditions, perform the following skills in moving
water in a properly equipped whitewater craft of your choice (tandem
canoe, solo canoe, or solo kayak). If a tandem canoe is used, the skills
must be demonstrated from both the bow and stern positions.
a.
Launch and land.
b.
Paddle forward in a straight line at least 10 boat lengths.
c.
Backpaddle in a straight line at least five boat lengths.
d.
Ferry upstream from both sides of the river.
e.
Ferry downstream from both sides of the river.
f.
Eddy turn from both sides of an eddy.
g.
Peel out from both sides of an eddy.
11.
Explain and demonstrate the following to your counselor:
a.
Self-rescue and procedures when capsized in moving water,
including a wet exit if necessary
b.
Proper use of a throw rope to rescue a swimmer in whitewater
c.
Proper technique for receiving a throw rope as a swimmer
d.
Portaging-where portaging would be appropriate, and when and how
to do it
e.
The whitewater buddy system using at least three persons and
three craft
12.
Participate in one or more whitewater trips using either a canoe or
kayak on a Class I and/or Class II river. The trip(s) must involve at
least six hours of paddling time. For each trip:
a.
Help to prepare a written plan, specifying the route (put-ins
and takeouts), schedule, equipment, safety precautions, and
emergency procedures.
b.
Determine local rules and obtain permission from landowners and
land managers in advance.
c.
Explain what steps have been taken to comply with Scouting
America Safety Afloat and the American Whitewater safety
guidelines.
d.
Show how to protect personal and group equipment from water and
how to load and secure the containers in boats to be used in the
trip. Execute the plans with other paddlers.
e.
Explain to your counselor how well your plans worked for each
trip taken.